Conference Proceedings

 

133. Derayatifar, M. and Tahani, M., “Nonlinear Free Vibration of Functionally Graded Piezomagnetoelastic Energy Harvester," The 25th Annual International Conference on Composites/Nano Engineering (ICCE-25), July 16-22, 2017.

132. Yousefsani, S.A. and Tahani, M., “Interfacial Void in Adhesively Bonded Composite Joint Integrated with Piezoelectric Patch," The 25th Annual International Conference on Composites/Nano Engineering (ICCE-25), July 16-22, 2017.

131. Safarian, S. and Tahani, M., “Multiscale Mechanical Modeling of Epoxy-Graphite Nanoplatelet Composites Using Asymptotic Homogenization Method," The 25th Annual International Conference on Composites/Nano Engineering (ICCE-25), July 16-22, 2017.

130. Mokhtari Amir Majdi, M.A. and Tahani, M., “Dynamic Pull-In Behaviour of Rotating Micro-Bridge Gyroscopes Considering Harmonic Base Excitations and Application of Instantaneous DC voltage," Seoul 21th International onference on Engineering & Technology, Computer, Basic & Applied Sciences (ECBA-2017), Seoul, South Korea, March 3-4, 2017.

129. Derayatifar, M. and Tahani, M., “Analytical Modeling for Free Vibration of Functionally Graded Piezoelectric Energy Harvester with Geometric Nonlinearities," The 5th International Conference on Composites: Characterization, Fabrication and Application (CCFA-5), Tehran, Iran, Dec. 20-21, 2016.

128. Karimian Eghbal, M. and Tahani, M., “Optimized Manhole Made of Composite SMC Using Taguchi Method," The 5th International Conference on Composites: Characterization, Fabrication and Application (CCFA-5), Tehran, Iran, Dec. 20-21, 2016.

127. Kamali Moghaddam, M. and Tahani, M., “Study of the Effect of Temperature on Frequency Behavior of Carbon Nanotube in Mass Sensitive Sensors," International Conference on researches in Science and Engineering, Istanbul, Turkey, July 28, 2016.

126. Soleymani, M. and Tahani, M., “Effect of Resin Pocket Area on the Mechanical Strength and Crack Propagation of Tapered Sandwich Composites," The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016), Tehran, Iran, Feb. 16-17, 2016.

125. Soleymani, M. and Tahani, M., “Effect of Resin Pocket Area on the Mechanical Strength and Failure of Variable Thickness Sandwich Composites of Turbine Rotor Blade," The 4th Iranian Conference on Renewable Energy & Distributed Generation, Mashhad, Iran, March 2-3, 2016. (in Persian).

124. Khoshrouye Ghiasi, E. and Tahani, M., “Transient Characteristics of Microelectromechanical Systems Considering Squeeze Film Damping and Electrostatic Actuation," 24th Annual International Conference on Mechanical Engineering-ISME2016, Yazd, Iran, April 26-28, 2016.

123. Rastegar, A., Tahani, M., Hadidi Moud, S., “Numerical Investigation of Welding Speed Effect on Residual Stress, Fracture Toughness and Fatigue Crack Growth Rate in Friction Stir Welded 2024-T351 Aluminum Alloy Joints," 2nd International Conference & 3rd National Conference on New Technologies Application in Engineering, Mashhad, Feb. 25, 2016.

122. Askari, A.R. and Tahani, M., “The Influence of Couple Stress Components and Electrostatic Actuation on Free Vibration Characteristics of Thin Micro-Plates," The 7th International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2016), Cape Town, South Africa, Feb. 1-3, 2016.

121. Salehitabar, M. and Tahani, M., “Finite Element Simulation of Bird Impact to the Aluminum-Composite Hybrid Leading Edge," Conference on Modern Achievements on Aerospace, Mechanics and Related Sciences, Tehran, Sep. 11, 2015. (in Persian).

120. Salehitabar, M. and Tahani, M., “Finite Element Investigation of the Bird Strike to the Aluminum Shell Panels Based on SPH Method," Conference on Modern Achievements on Aerospace, Mechanics and Related Sciences, Tehran, Sep. 11, 2015. (in Persian).

119. Khoshrouye Ghiasi, E. and Tahani, M., “An Investigation into the Non-Linear Dynamic Pull-In Instability of Beam-Type MEMS Structures under Distributed Electrostatic Force Considering SQFD Phenomenon," 5th International Conference on Acoustics and Vibration (ISAV2015), Tehran, Iran, Nov. 25-26, 2015.

118. Davarian, V. and Tahani, M., “Free Vibration Analysis of Mindlim FG Unisng Modified Couple Stress Theory and GDQ Method," 5th International Conference on Acoustics and Vibration (ISAV2015), Tehran, Iran, Nov. 25-26, 2015. (in Persian).

117. Mokhtari, M.A. and Tahani, M., “Pull-In Instability of Electrically Actuated FGM Micro-Beam Under the Mechanical Shock Based on Modified Couple Stress Theory," 5th International Conference on Acoustics and Vibration (ISAV2015), Tehran, Iran, Nov. 25-26, 2015.

116. Khoshrou Ghiasi, E. and Tahani, M., “Analysis of Non-Linear Dynamic Pull-In Instability Response of an Electrically Actuated Double-Clamped Micro-Beam Due to Squeeze-Film Damping Effects," 3rd International Conference on Nanotechnology (ICN2015), Istanbul, Turkey, Aug. 27-28, 2015.

115. Khoshrou Ghiasi, E. and Tahani, M., “Study of Squeeze Film Damping in Microelectromechanical Systems," 2nd E-Congress on Recent Research in Science and Technology, Kerman, July 21, 2015.

114. Yousefsani, S.A. and Tahani, M., “Accurate Analysis of Adhesively Bonded Piezoelectric Actuators Using Full Layerwise Theory," International Conference on Mechanics of Complex Solids and Fluids (ICMCSF), Lille, France, May 17-22, 2015.

113. Mohsenzadeh, A., Tahani, M., and Askari, A.R., “Size-Dependent Pull-in Analysis of Electrically Actuated Micro-Plates based on the Modified Couple Stress Theory," Recent Advances on Mechanics, Materials, Mechanical Engineering and Chemical Engineering (MMMCE2015), Barcelona, Spain, April 7-9, 2015.

112. Derayatifar, M., Tahani, M., and Askari, A.R., “Dynamic Pull-In Study of Double-Clamped MEMS under High Impact Acceleration," 23rd Annual International Conference on Mechanical Engineering-ISME2015, Tehran, Iran, May 12-14, 2015. (in Persian).

111. Askari, A.R. and Tahani, M., "Closed-Form Solutions for Static Pull-In Voltage and Detachment Length of Electrostatically Actuated Nano-Cantilevers under the Effect of vdW Attraction," Asian Nano Forum Conference, Kish Island, Iran, March 8-11, 2015.

110. Askari, A.R., Mohsenzadeh, A., and Tahani, M., "Free Vibration Analysis of a Fully Clamped Rectangular Plate-Type Nano-Resonator in Presence of the Casimir Force," Asian Nano Forum Conference, Kish Island, Iran, March 8-11, 2015.

109. Askari, A.R. and Tahani, M., "Dynamic Pull-In Analysis of Cantilever-Type NEMS under the Mechanical Shock and vdW Attraction," Asian Nano Forum Conference, Kish Island, Iran, March 8-11, 2015.

108. Ashjaee, N.,Hoseinitabatabaei, S.M., and Tahani, M. "Design Optimization of an Orthopedic Screw Based on Stress Stimulus Using Taguchi Method and Finite Element Analysis," 2nd National Conference on Applied Researches in Electrical, Mechanical and Mechatronics Engineering, Tehran, Iran, Feb. 19, 2015.

107. Askari, A.R., Tahani, M., and Shariati, M., "Size-Dependent Flexural Wave Propagation and Free Vibration of Functionally Rayleigh's Micro-Beams based on the Modified Couple Stress Theory," 4th International Conference on Acoustics and Vibration (ISAV2014), Tehran, Iran, Dec. 10-11, 2014.

106. Tahani, M., Batra, R., and Askari, A.R., "Size-Dependent Free Vibrations of Electrostatically Pre-Deformed Functionally Graded Micro-Cantilevers," The 3rd Global Conference on Materials Science and Enginnering (CMSE 2014), Shanghai, China, Oct. 20-23, 2014.

105. Alizadeh, V., Tahani, M., and Ghassabi, A., "Nonlinear Dynamic Mdeling of Fast Trilayer Polypyrrole (PPy) Bending Actuators with Tip Mass," The 21st International Congress on Sound and Vibration, Beijing, China, July 13-17, 2014.

104. Kazemnia Kakhki, E., Tahani, M., and Hosseini, S.M., "Analytical Analysis of Thermoelastic Damping in a Micro-Beam Resonator using the Lord-Shulman Theory," The First International Conference on MEMS and Microfabvrication, Tehran, Iran, Feb. 18-19, 2014.

103. Soleymaninia, M., Shahabian, F., Tahani, M., and Hamidifar, M., "Study of Buckling in Perforated FGM Cylinders," The 8th Conference on Civil Engineering, Babol, Iran, May. 7-8, 2014. (in Persian).

102. Ghazanfar, H., Tahani, M., and Askari, A.R., "Pull-In Time Study of Double Clamped Micro-Electromechanical Beam under the Squeezed Air-Film Effect," The First International Conference on MEMS and Microfabrication, Tehran, Iran, Feb. 18-19, 2014.

101. Mohsen Zadeh, A., Tahani, M., and Daqigeh Rezaei, S., "Investigation of Length and Initial Gap Variation on Pull-in Voltage of Multilayered Micro-Beam," The First International Conference on MEMS and Microfabrication, Tehran, Iran, Feb. 18-19, 2014.

100. Mohsen Zadeh, A., Tahani, M., and Daqigeh Rezaei, S., "Material and Geometrical Characteristics Investigation of Micro-Beam on Pull-in Voltage Using FEM and Taguchi DOE," The First International Conference on MEMS and Microfabrication, Tehran, Iran, Feb. 18-19, 2014.

99. Mohsen Zadeh, A. and Tahani, M., "An Alternative Accurate Method to Pull-in Prediction in Electrically Actuated Fully Clamped Rectangular Micro-Plates," The First International Conference on MEMS and Microfabvrication, Tehran, Iran, Feb. 18-19, 2014.

98. Kazemnia Kakhki, E., Tahani, M., and Hosseini, S.M., "Analytical Analysis of Thermoelastic Damping in a Microbeam Resonator Using the Lord Schulman Theory," The First International Conference on MEMS and Microfabrication, Tehran, Iran, Feb. 18-19, 2014. (in Persian).

97. Arhami, M. and Tahani, M. "Sensitivity Analysis of Longitudinal Vibration of a Small Aircraft," 3rd International Conference on Acoustics and Vibration, Tehran, Iran, Dec. 25-26, 2013. (in Persian).

96. Rezazadeh Hamedani, M., Tahani, M., and Hosseini, S.M., "Thermoelastic Vibration in a Nano Beam as NEMS Based on the Green-Naghdi Theory," 3rd International Conference on Acoustics and Vibration, Tehran, Iran, Dec. 25-26, 2013. (in Persian).

95. Sepehri, B., Asadi, A., Tahani, M., Firouzi, F., and Torshizian, M.R., "Experimental and Numerical Study of Fracture Toughness of Bone using Arcan Fixture," 20th Iranian Conference of Biomedical Engineering (ICBME2013), Dec. 18-20, 2013. (in Persian).

94. Mehrkish, A., Tahani, M., Ghazanfar, H., Norouzi Ghazbi, S., and Zare, S., "A study on Systematic Procedure for Choosing the Best Powertrain Configuration in Hybrid Sedan Cars," 4th International Conference on Mechanical and Aerospace Engineering (ICMAE 2013), Moscow, Russia, July 20-21, 2013.

93. Varshovi Jaghargh, P. and Tahani, M. “Experimental and Numerical Optimization of Adhesive Composite Pipe under Tensile Loading," 21st Annual International Conference on Mechanical Engineering-ISME2013, Tehran, Iran, May 7-9, 2013. (in Persian).

92. Mehrkish, A., Tahani, M., and Kioumarsi, E., “Presentation and Modeling of a Multi-Compartment Engine Mount with Cooling Capacity," National Conference on Mechanical Engineering, Iran, May 30, 2013. (in Persian).

91. Ghazanfar, H. and Tahani, M., "Study of Pull-In Instability in Fully Clamped Nano/Micro Beams Considering Electrostatic and Intermolecular Forces," National Conference on Mechanical Engineering, Iran, May 30, 2013. (in Persian).

90. Askari, A.R. and Tahani, M., “On the Response of Clamped-Clamped Nano-Electro-Mechanical Beam under Mechanical Shock Incorporating the Casimir Force,” 2nd International Conference on Acoustics and Vibration, Tehran, Iran, Dec. 26-27, 2012.

89. Askari, A.R. and Tahani, M., “Dynamic Pull-in Investigation of a Clamped-Clamped Nano-Electro-Mechanical Beam under Ramp-Input Voltage and the Casimir Force,” 2nd International Conference on Acoustics and Vibration, Tehran, Iran, Dec. 26-27, 2012.

88. Khadembashi, S.A., Maleki, S., Tahani, M., “Modeling of Composite Repair System in Gas and Oil Pipelines with Leakage,” 4th Iranian Pipe & Pipeline Conference, Tehran, Iran, Oct. 9-10, 2012. (in Persian).

87. Alizadeh, V. and Tahani, M. “Nonlinear Dynamic Modeling of Fast Polypyrrole (PPy) Based Trilayer Bending Actuators,” International Conference on Mechanical Engineering and Advanced Technology (ICMEAT2012), Isfahan, Iran, Oct. 10-12, 2012.

86. Varshovi Jaghargh, P., Roudi, H., and Tahani, M. “Optimization of Adhesive Composite Pipe Joints Using Genetic Algorithm,” International Conference on Mechanical Engineering and Advanced Technology (ICMEAT2012), Isfahan, Iran, Oct. 10-12, 2012.

85. Najafzadeh Babaei, M. and Tahani, M. “Divergence and Flutter Instability Analysis of Carbon Nanotubes Conveying Fluid using the Timoshenko Beam Theory,” International Conference on Mechanical Engineering and Advanced Technology (ICMEAT2012), Isfahan, Iran, Oct. 10-12, 2012.

84. Askari, A.R., Tahani, M., Tahani, M.R., “Analytical Approximations to Nonlinear Vibration of Clamped Nano-Electro-Mechanical Beam in Presence of the Casimir Force,” International Conference on Mechanical Engineering and Advanced Technology (ICMEAT2012), Isfahan, Iran, Oct. 10-12, 2012.

83. Maghami, S.A., Tahani, M., Tahani, M.R., “Bending Analysis of Cylindrical Shell Panels Using Multi-Term Extended Kantorovich Method,” International Conference on Mechanical Engineering and Advanced Technology (ICMEAT2012), Isfahan, Iran, Oct. 10-12, 2012. (in Persian).

82. Yousefsani, S.A., Tahani, M., Tahani, M.R., “Stress Analysis of Heterogeneous Double-Sided Strap Joints under Mechanical Loading Using Full Layerwise Theory,” International Conference on Mechanical Engineering and Advanced Technology (ICMEAT2012), Isfahan, Iran, Oct. 10-12, 2012.

81. Maghami, S.A. and Tahani, M., “Thermal Bending Analysis of Moderately Thick Laminated Shell Panels with General Boundary Conditions Using Multi-Term Extended Kantorovich Method,” North American Thermal Analysis Society (NATAS), Paper ID 82, Orlando, Florida, USA, August 12-15, 2012.

80. Yousefsani, S.A. and Tahani, M., “Localized Thermal Analysis of Adhesively Bonded Single-lap Joints using Full Layerwise Theory,” North American Thermal Analysis Society (NATAS), Paper ID 26, Orlando, Florida, USA, August 12-15, 2012.

79. Yousefsani, S.A. and Tahani, M., “Analytical Localized Thermo-Mechanical Analysis of Bi-Material Thermostats using the Full Layerwise Theory,” North American Thermal Analysis Society (NATAS), Paper ID 27, Orlando, Florida, USA, August 12-15, 2012.

78. Askari, A.R. and Tahani, M., “Investigation of Dynamic Pull-in Instability in Clamped-Clamped Nanobeam-Based NEMS Devices under Intermolecular Surface Forces,” 20th Annual International Conference on Mechanical Engineering-ISME2012, Shiraz, Iran, May 16-18, 2012.

77. Karimi, G., Tahani, M., and Jahanian, O., “The Effects of Segmentation in Above Knee Prosthesis during the Swing Phase,” 19th Annual International Conference on Mechanical Engineering (ISME2011), Birjand, Iran, May 10-12, 2011.

76. Haghighi, B., Tahani, M., and Rouhi, G., “An Investigation into the Effects of Orthopedic Screw’s Geometrical Specifications on the Stress Shielding in Bone,” 19th Annual International Conference on Mechanical Engineering (ISME2011), Birjand, Iran, May 10-12, 2011. (in Persian).

75. Norouzi, S., Tahani, M., Mehrkish, A., and Ghazanfar, H., “Introducing Sensitivities and Their Application in Selecting Components of a Hybrid Electric Vehicle,” 19th Annual International Conference on Mechanical Engineering (ISME2011), Birjand, Iran, May 10-12, 2011. (in Persian).

74. Mehrkish, A., Tahani, M., Norouzi, S., and Ghazanfar, H., “Design of Decision Making Algorithm for Optimum Power Line Arrangement of a Sedan Hybrid Electric Vehicle,” 19th Annual International Conference on Mechanical Engineering (ISME2011), Birjand, Iran, May 10-12, 2011. (in Persian).

73. Ghazanfar, H., Tahani, M., Mehrkish, A., and Norouzi, S., “Study of Combustion Engine Effect on Performance of a Parallel Hybrid Vehicle and Suggestion of Engine Selection Algorithm,” 19th Annual International Conference on Mechanical Engineering (ISME2011), Birjand, Iran, May 10-12, 2011. (in Persian).

72. Tahani, M. and Golmakani Torghabeh, I., “Transient Analysis of Rectangular Laminated Plates Subjected to Dynamic Transverse Loading Using a Layerwise Theory,” The 10th WSEAS International Conference on Applied Computer and Applied Computational Science (ACACOS '11), Italy, Venice, March 8-10, 2011.

71. Zharfi, H., Ashory, M.R., Tahani, M., “Active Vibration Control of a Composite Beam Using Piezoelectric Layers," The 17th International Congress of Sound and Vibration (ICSV17), Cario, July 18-22, 2010.

70. Safari, A., Tahani, M., and Hosseini, S.M., “Analytical Solution for Two-Dimensional Dynamic Response Analysis of Functionally Graded Thick Hollow Cylinder with Finite Length Subjected to Impact Loading," The Second International Conference on Composites: Characterization, Fabrication and Application, Iran, Kish Island, Dec. 27-30, 2010.

69. Tahani, M. and Golmakani Torghabeh, I., “Forced Vibration Analysis of Cross-Ply Laminated Plates Using a Layerwise Theory," The Second International Conference on Composites: Characterization, Fabrication and Application, Iran, Kish Island, Dec. 27-30, 2010.

68. Tahani, M., Yazdanpanah Moghadam, P., and Abolbashari, M.H., “Analytical solution of functionally graded plates with any combination of clamped and simply supported boundary conditions under transverse mechanical loading,” 6th Australasian Congress on Applied Mechanics, Perth, Australia, Dec. 12-15, 2010.

67. Karimi, G. and Tahani, M., “SEP Controlling Parameter in Design of Above Knee Prosthesis with Moving Ankle,” 17th Iranian Conference on Biomedical Engineering (ICBME2010), Isfahan, Iran, Nov. 3-4, 2010.

66. Sahebdel Fard, K., Tahani, M., and Naserian-Nik, A.M., “Simulation of DNA Dielectrophoresis by Finite Element Method,” 18th Annual International Conference on Mechanical Engineering (ISME2010), Tehran, Iran, May 11-13, 2010.

65. Safari, A., Tahani, M., and Hosseini, S.M., “Analytical Solution of a Thick FGM Cylinder under a Mechanical Shock Loading,” 18th Annual International Conference on Mechanical Engineering (ISME2010), Tehran, Iran, May 11-13, 2010. (in Persian).

64. Tahani, M., Akbarzadeh Tootoonchi, A., Kalani, H., and Safehian, J., “Dynamic Analysis of a Snake Robot in Wave-Shape Motion based on Symmetric and Asymmetric Serpenoid Curves,” 10th Conference on Manufacturing Engineering (ICME2010), Babol, Iran, March 1-3, 2010. (in Persian).

63. Kordjazi, H.R., Akbarzadeh Tootoonchi, A., Tahani, M., “Direct Dynamic Analysis of 3-PRR Planar Parallel Robot Using Natural Orthogonal Complement,” 10th Conference on Manufacturing Engineering (ICME2010), Babol, Iran, March 1-3, 2010. (in Persian).

62. Golmakani Torghabe, I. and Tahani, M., “Application of the Layerwise Theory for Analyzing Three-Dimensional Stress Filed in Thick Laminated Composite Plates,” The 9th Iranian Aerospace Society Conference, Tehran, Iran, Feb. 8-10, 2010. (in Persian).

61. Tahani, M. and Golmakani Torghabe, “Bending of the Levy-Type Laminates Composite Plates Using the First-Order Shear Deformation Theory,” National Conference on Mechanical Engineering, Mashhad, Iran, Dec. 3-4, 2010. (in Persian).

60. Tahani, M. and Golmakani Torghabe, “Free Vibration of the Levy-Type Laminates Composite Plates Using the First-Order Shear Deformation Theory,” National Conference on Mechanical Engineering, Mashhad, Iran, Dec. 3-4, 2010. (in Persian).

59. Tahani, M., Sahebdel Fard, K., and Naserian Nik, A.M., “Mechanical Properties Comparison of Small and Long dsDNA,” 1st congress of role of sciences in Nanotechnology, Emam Hosein University, Tehran, Iran, 9-10 Dec., 2009. (in Persian).

58. Tahani, M., Talebian, T., and Todoroki, A., “Transient Analysis of Functionally Graded Thick Hollow Circular Cylinders under Mechanical loadings,” Asian Pacific Conference for Materials and Mechanics 2009 (APCMM2009), Yokohama, Japan, 13-16 Nov., 2009.

57. Tahani, M., Hoseini, S.M., Safari, A., and Todoroki, A., “Time History Analysis of Stresses in Functionally Graded Thick Hollow Cylinder subjected to Thermal Shock Loading using Analytical Method,” Asian Pacific Conference for Materials and Mechanics 2009 (APCMM2009), Yokohama, Japan, 13-16 Nov., 2009.

56. Andakhshideh, A., Tahani, M., Maleki, S., and Aghdam, M.M., “Non-linear Bending Analysis of Laminated Composite Plates Using Generalized Differential Quadrature Method,” 17th International Conference on Composite Materials (ICCM17), Edinburgh, UK, 27-31 July, 2009.

55. Gheybi, S. and Tahani, M., “Analysis of Dynamic Interlaminar Stresses in Antisymmetric Angle-Ply Composite Laminated Plates,”3rd International Conference on Advanced Computational Engineering and Experimenting (ACE-X 2009), Rome, Italy, June 22-23, 2009.

54. Tahani, M. and Golmakani, I., “Static Analysis of Antisymmetric Cross-Ply Thick Laminated Plates Using a Layerwise Theory: The Lévy-Type Solution,” 3rd International Conference on Advanced Computational Engineering and Experimenting (ACE-X 2009), Rome, Italy, June 22-23, 2009.

53. Tahani, M. and Selahi, E., “Through Thickness Stress Analysis of Composite Adhesively Thick Bonded Joints Using Energy and Variational Methods,” 3rd International Conference on Advanced Computational Engineering and Experimenting (ACE-X 2009), Rome, Italy, June 22-23, 2009.

52. Tahani, M. and Kazemzadeh Khoee, O., “An Analytical Solution for Bending and Vibration Analysis of Tapered Composite Beams,” 15th International Conference on Composite Structures, Porto, Portugal, June 15-17, 2009.

51. Zabihi Ferezqi, H., Tahani, M., and Ekhteraei Toussi, H., “Analytical Approach to Free Vibrations of Cracked Timoshenko Beams Made of Functionally Graded Materials,” 15th International Conference on Composite Structures, Porto, Portugal, June 15-17, 2009.

50. Tahani, M. and Tolou Donyamati, A., “Non-Linear Analysis of Composite Beams with Piezopelectric Layers under Electrical Loading,” 17th. Annual (International) Conference on Mechanical Engineering (ISME2009), University of Tehran, Iran, May 2009. (in Persian).

49. Zabihi, H., Ekhteraee Tousi, H., and Tahani, M., “Effect of Edge Open Cracks on FGM Beams,” 17th. Annual (International) Conference on Mechanical Engineering (ISME2009), University of Tehran, Iran, May 2009. (in Persian).

48. Andakhshideh, A., Tahani, M., Maleki, S., and Aghdam, M.M., “Linear and Non-linear Analyses of Functionally Graded Plates Using Generalized Differential Quadrature Method,” 2nd ECCOMAS Thematic Conference on the Mechanical Response of Composites (Composites2009), Imperial College London, UK, April 1-3, 2009.

47. Tahani, M. and Anbarsouz, M., “Effect of Functionally Graded Materials on Maximum Stress at the Bone-Implant Interface in Dental Implants,” 15th Iranian Conference of Biomedical Engineering (ICBME2008), Feb. 12-13, 2009. (in Persian).

46. Tahani, M. and Tolou Donyamati, A., “Non-Linear Analysis of Interlaminar Stresses in Composite Beams with Piezoelectric Layers,” 7th International Conference on Composite Science and Technology (ICCST/7), American University of Sharjah, Sharjah, UAE, Jan. 20-22, 2009.

45. Kolahan, F., Tahani, M., and Tadayyon, G.S., “A Heuristic Algorithm Approach for Free Vibration Optimization of Functionally Graded Adhesive Single Lap Joints,” 7th International Conference on Composite Science and Technology (ICCST/7), American University of Sharjah, Sharjah, UAE, Jan. 20-22, 2009.

44. Tahani, M. and Mohammad Hosseini, A., “Analytical Solution of Strain Energy Release Rate in Cracked Functionally Graded Bimaterial Beams,” 7th International Conference on Composite Science and Technology (ICCST/7), American University of Sharjah, Sharjah, UAE, Jan. 20-22, 2009.

43. Tahani, M. and Gheybi, S., “Analysis of Interlaminar Stresses in General Cross-Ply Composite Laminates Subjected to Transient Vibration,” 7th International Conference on Composite Science and Technology (ICCST/7), American University of Sharjah, Sharjah, UAE, Jan. 20-22, 2009.

42. Tahani, M., Kolahan, F., and Tadayyon, G.S., “Modeling and Optimization of Functionally Graded Adhesive Single Lap Joints under Free Vibrations,” The First International Conference on Composites: Characterization, Fabrication and Application, Iran, Kish Island, Dec. 15-18, 2008.

41. Tahani, M. and Hosseini, A.M., “Separation of Fracture Modes in Functionally Graded Material Beams,” The First International Conference on Composites: Characterization, Fabrication and Application, Iran, Kish Island, Dec. 15-18, 2008.

40. Tahani, M. and Gheybi, S., “Analysis of Interlaminar Stresses in General Cross-Ply Composite Plates Subjected to Free Vibration,” The First International Conference on Composites: Characterization, Fabrication and Application, Iran, Kish Island, Dec. 15-18, 2008.

39. Sarhadi, A., Tahani, M., and Kolahan, F., “Multi-Objective Optimal Design of Sandwich Composite Laminates Using Simulated Annealing and FEM,” Pressure Vessel & Piping Conference, Chicago, Illinois, USA, July 27-31, 2008.

38. Tahani, M. and Izadi, M. “Nonlinear Edge Effect Analysis of Laminated Beams with Piezoelectric Layers,” 13th European Conference on Composite Materials (ECCM-13), KTH, Stockholm, Sweden, June 2-5, 2008.

37. Tahani, M., Soheili, S., Abachizadeh, M., and Farshidianfar, A., “Rotors Frequency and Time Response of Torsional Vibration Using Hybrid Modeling,” 16th. Annual (International) Conference on Mechanical Engineering (ISME2008), Shahid Bahonar University of Kerman, Kerman, Iran, 14-16 May, 2008.

36. Tahani, M. and Gheybi, S., “Determination of Proper Position of Steering Wheel Ball Joint of Rack and Pinion Steering System,” 16th. Annual (International) Conference on Mechanical Engineering (ISME2008), Shahid Bahonar University of Kerman, Kerman, Iran, 14-16 May, 2008. (in Persian).

35. Tahani, M. and Zharfi, H., "Active Vibration Control of Composite Beams with Integrated Piezoelectric Layers," 16th. Annual (International) Conference on Mechanical Engineering (ISME2008), Shahid Bahonar University of Kerman, Kerman, Iran, 14-16 May, 2008. (in Persian).

34. Tahani, M. and Gheybi, M., “Analysis of Interlaminater Stresses in Cross-Ply Composite Laminates Subjected to Free Vibrations,” National Conference on Manufacturing Engineering, Feb. 20-21, 2008. (in Persian).

33. Kadkhodayan, M., Zafarparandeh, I., and Tahani, M., ”U-Bending Analysis with an Emphasis on Influence of Hardening Models,” The 7th Iranian Aerospace Society Conference, Sharif University of Technology, Tehran, Iran, Feb. 19-21, 2008.

32. Tahani, M., Irani, N., and Izadi Najafabadi, M., “Tolerance Analysis of the Safety Belt Angle Sensor System,” Tehran International Congress on Manufacturing Engineering (TICME2007), Tehran, Iran, Dec. 10-13, 2007. (in Persian).

31. Tahani, M. and Izadi Najafabadi, M., “Analytical Determination of Free Edge Stresses in Composite Laminates with Piezoelectric Layers,” ECCOMAS Thematic Conference on Mechanical Response of Composites, Porto, Portugal, 12-14 Sep., 2007.

30. Tahani, M. and Talebian, T., “Studies on Dynamic Behavior of Functionally Graded Hollow Cylinders,” ECCOMAS Thematic Conference on Mechanical Response of Composites, Porto, Portugal, 12-14 Sep., 2007.

29. Izadi Najafabadi, M. and Tahani, M., “Analytical Determination of Free Edge Stresses in Composite Laminates with Piezoelectric Material Properties,” 8th HSTAM Internacional Congress on Mechanics, Patras, Greece, 12-14 July, 2007.

28. Vahdati, A., Ghalichi, F., Rouhi, G., and Tahani, M., “Mechanically Induced Trabecular Bone Remodeling Including Cellular Accommodation Effect,” 8th HSTAM Internacional Congress on Mechanics, Patras, Greece, 12-14 July, 2007.

27. Tahani, M. and Mirzababaee, S.M., “Analytical Solution for Nonlinear Bending of FGM Plates by a Layerwise Theory,” 16th International Conference on Composite Materials (ICCM16), Kyoto, Japan, 8-13 July, 2007.

26. Vahdati, A., Rouhi, G., Ghalichi, F., and Tahani, M., “Computer Simulation of Trabecular Bone Remodeling: Role of Cellular Accommodation in Time-Dependent Simulations,” Computer Methods in Mechanics (CMM-2007), Łódź-Spała, Poland, 19-22 June, 2007.

25. Tahani, M. and Jafari, M., “A Study of Piezoelectric Laminated Composite Beams Subjected to Electro-Mechanical Loadings,” 6th International Symposium on Advanced Composites (COMP07), Corfu, Greece, 16-18 May, 2007.

24. Abachizadeh, M. and Tahani, M., “Ant Colony Optimization of Hybrid Laminates for Minimum Cost and Weight,” 6th International Symposium on Advanced Composites (COMP07), Corfu, Greece, 16-18 May, 2007.

23. Vahdati, A., Rouhi, G., Ghalichi, F., and Tahani, M., “Computer Simulation of Bone Remodeling Model Including Cellular Accomodation Effect,” 15th Annual (International) Mechanical Engineering Conference (ISME2007), Amirkabir University of Technology, Tehran, Iran, 15-17 May, 2007.

22. Tahani, M. and Talebian, T., “An Analysis of Functionally Graded Cylindrical Vessels Subjected to Thermo-Mechanical Loadings,” 15th Annual (International) Mechanical Engineering Conference (ISME2007), Amirkabir University of Technology, Tehran, Iran, 15-17 May, 2007. (in Persian).

21. Abachizadeh, M., Tahani, M., and Soheili, S., “Ant Colony Optimization Applied to Discrete and Continuous Structural Problems,” 15th Annual (International) Mechanical Engineering Conference (ISME2007), Amirkabir University of Technology, Tehran, Iran, 15-17 May, 2007.

20. Sabeti, M. R., Darvizeh, M., and Tahani, M., “Static Analysis of Smart Composite Plates with a New Accurate Method,” The 6th Iranian Aerospace Society Conference, Khaje Nasire Tousi University, Tehran, Iran, Feb., 2007. (in Persian).

19. Mahdavi, M.H., Farshidianfar, A., Tahani, M., and Dalir, H., “Frequency Analysis of Atomic Force Microscopy Cantilevers in a Dynamic Mode Considering Tip Mass and Moment of Inertia,” 3rd International Congress of Nanotechnology (ICNT 2006), USA, 30th Oct.-2th Nov. 2006.

18. Tahani, M. and Naserian-nik, A.M., “Analytical Study of Piezoelectric Actuated Laminates under Transverse Loading,” 12th European Conference on Composite Materials (ECCM12), Biarritz, France, 29th Aug. – 1st Sep. 2006.

17. Tahani, M., “Analysis of Functionally Graded Cylindrical Shells Subjected to Mechanical and Thermal Loadings,” 12th European Conference on Composite Materials (ECCM12), Biarritz, France, 29th Aug. – 1st Sep. 2006.

16. Tahani, M. and Naserian-nik, A.M., “Theorical Analysis of Piezoelectric Hybrid Plates,” 14th Annual (International) Mechanical Engineering Conference (ISME2006), Isfahan University of Technology, Isfahan, Iran, May 2006.

15. Tahani, M., Torabizadeh, M.A., and Fereidoon, A., “Non-linear Bending Response of Functionally Graded Beams Under Transverse Loads,” 14th Annual (International) Mechanical Engineering Conference (ISME2006), Isfahan University of Technology, Isfahan, Iran, May 2006.

14. Darvizeh, M., Sabeti, R. and Tahani, M., Ansari, R., “Presentation of a New Accurate Method for Static Analysis of Smart Laminated Plates with Various Boundary Conditions,”14th Annual (International) Mechanical Engineering Conference (ISME2006), Isfahan University of Technology, Isfahan, Iran, May 2006. (in Persian).

13. Tahani, M. and Abachizadeh, M., “An Study of Various Optimization Methods for Composite Structures,” 14th Annual (International) Mechanical Engineering Conference (ISME2006), Isfahan University of Technology, Isfahan, Iran, May 2006. (in Persian).

12. Kolahan, F., Tahani, M., and Sarhadi, A., “Optimal Design of Sandwitch Composite Laminates for Minimum Cost and Maximum Frequency Using Simulated Annealing,” Tehran International Congress on Manufacturing Engineering (TICME2005), Tehran, Iran, Dec. 12-15, 2005.

11. Tahani, M., Kolahan, F., and Sarhadi, A., “Genetic Algorithm for Multi-Objective Optimal Design of Sandwich Composite Laminates with Minimum Cost and Maximum Frequency,” International Conference on Advances in Materials, Product Design & Manufacturing Systems (ICMPM 2005), pp. 741-748, Sathyamangalam, India, Dec. 12-14, 2005.

10. Tahani, M. and Naserian, A., “Bending Analysis of Composite Laminates with Arbitrary Boundary Conditions,” 2nd Iranian Conference on Thin-Walled Structures, pp. 8-16, Kerman, Iran, Nov 16-17, 2005. (in Persian).

9. Tahani, M. and Soheili, S., “Frequency and Time Response of Rotors Longitudinal Vibration Using Hybrid Modeling,” 13th Annual (International) Mechanical Engineering Conference (ISME 2005), Isfahan, Iran, May 2005.

8. Tahani, M., Noseir, A., Rezaeepazhand, J., and Zebarjad, S.A., "Analytical Stress Analysis of Rotating Beam Due to Material Discontinuities", Proceedings of the ACCM4 Conference, pp. 223-228, Sydney Australia, July 6-9, 2004.

7. Zebarjad, S.M., Sajjadi, S.A., Bagheri, R., Lazzeri, A., and Tahani, M., “Modification of Fracture Toughness of Isotactic Polypropylene with a Combination of EPR and CaCO3 Particles,” 12th International Scientific Conference of Achievement in Mechanical & Materials Engineering (AMME’2003), pp. 1073-1076, Poland, Dec. 7-10, 2003.

6. Nosier, A. and Tahani, M., “Non-Linear Analysis of Interlaminar Stresses in Composite Beams,” 13th International Conference on Composite Materials (ICCM-13), ID 1651, Beijing, China, June 25-29, 2001.

5. Nosier, A. and Tahani, M., “Accurate Determination of Interlaminar Stresses in Symmetric Cross-Ply Laminates,” 5th International and 9th Annual Mechanical Engineering Conference (ISME2001), pp. 107-113, May 27-29, 2001.

4. Nosier, A. and Tahani, M., “Interlaminar Stress Analysis in a Rotating Composite Beam Under Bending and Thermal Loading,” First International & Third Biennial Conference of The Iranian Aerospace Society (AERO2000), pp. 1229-1238, 2000. (in Persian).

3. Hosseinipour, S.J., Tahani, M., and Daneshi, G., “Investigation of Plastic Deformation and Energy Absorption in Axially Compressed Thin-Walled Grooved Tubes”, The Fourth Annual Congress of Metallurgical Society of Iran, Tehran Univ., pp. 199-207, 2000. (in Persian).

2. Tahani, M. and Katoozian, H.R., "Optimization of Load Distribution at the Cemented Implants,” First Congress of Iranian Orthopaedic, Shahid Beheshty University, Tehran, Iran, 1998. (in Persian).

1. Katoozian, H. R., Ahmadian, M.T., and Tahani, M., “Optimization of Load Distribution at the Bone-Implant Interface in Porous Coated Implants, a Micromechanical Study Using FEM,” 3rd International and 6th Annual Mechanical Engineering Conference (ISME98), pp. 739-747, 1998. (in Persian).