Journal Articles

 

113. Mokhtari Amir Majdi, M. and Tahani, M., "Size-Dependent Analysis of Micro-Bridge Gyroscopes under the Combined Effects of Instantaneous DC Voltage and Harmonic Base Excitations," Modares Mechanical Engineering, to appear. (in Persian).

112. Safarian, S. and Tahani, M., "Study of Stone-Wales Defect on Elastic Properties of Single-Layer Graphene Sheets by an Atomistic Based Finite Element Model," International Journal of Engineering, to appear.

111. Derayatifar, M., Tahani, M., and Moeenfard, H., "Nonlinear Analysis of Functionally Graded Piezoelectric Energy Harvesters," Composite Structures, Vol. 182, pp. 199-208, 2017.

110. Vahdatizadeh, H. and Tahani, M., "Analytical Bending Analysis of a Circular Sandwich Plate under Distributed Load," International Journal of Recent Advances in Mechanical Engineering, Vol. 6, No. 1, pp. 1-10, 2017.

109. Kamali Moghaddam, M. and Tahani, M., "Study the Effect of Environment Temperature on Mechanical and Fracture Behavior of Carbon Nanotubes," Modares Mechanical Engineering, Vol. 17, No. 3, pp. 87-92, 2017. (in Persian).

108. Mir, M., Tahani, M., and Hassani, B., "Analytical Prediction of Young's Modulus of Carbon Nanotubes Using a Variational Method," Applied Mathematical Modelling, Vol. 45, pp. 1031-1043, 2017.

107. Askari, A.R. and Tahani, M., "Size-Dependent Dynamic Pull-in Analysis of Geometric Non-Linear Micro-Plates based on the Modified Couple Stress Theory," Physica E: Low-dimensional Systems and Nanostructures, Vol. 86, pp. 262-274, 2017.

106. Yousefsani, S.A. and Tahani, M., "Relief of Edge Effects in Bi-Adhesive Composite Joints," Composites Part B: Engineering, Vol. 108, pp. 153-163, 2017.

105. Askari, A.R., Tahani, M., and Moeeinfard, H., "A Frequency Criterion for Doubly Clamped Beam-Type N/MEMS subjected to the van der Waals Attraction," Applied Mathematical Modelling, Vol. 41, pp. 650-6666, 2017.

104. Akbarzade, M., Farshidianfar, A., and Tahani, M., "Nonlinear Free and Forced Vibrations of Curved Single Walled Carbon Nanotube on a Pasternak Elastic Foundation," Scientia Iranica, Vol. 23, No. 6, pp. 3087-3098, 2016.

103. Hosseinitabatabaei, S., Ashjaee, N., and Tahani, M., "Introduction of Maximum Stress Parameter for the Evaluation of Stress Shielding around Orthopedic Screws in the Presence of Bone Remodeling Process," Journal of Medical and Biological Engineering, Vol. 37, No.5, pp. 703-716, 2017.

102. Tahani, M., Andakhshideh, A., and Maleki, S., "Interlaminar Stresses in Thick Cylindrical Shell with Arbitrary Laminations and Boundary Conditions under Transverse Loads," Composites Part B: Engineering, Vol. 98, pp. 151-165, 2016.

101. Rastegar, A., Ghahremani Moghadam, D., Farhangdoost, K., and Tahani, M., "Numerical and Experimental Investigation of Welding Speed Effect on Fatigue Crack Growth in Friction Stir Welded 2024-T351 Aluminum Alloy," Modares Mechanical Engineering, Vol. 16, No. 6, pp. 91-100, 2016. (in Persian).

100. Talebian, S.T. and Tahani, M., "Dynamic Response of Multiwall Boron Nitride Nanotubes Subjected to Impact," Bulletin of Materials Science, Vol. 38, No. 7, pp. 1797-1805, 2015.

99. Askari, A.R. and Tahani, M., “Stability Analysis of Electrostatically Actuated Nano/Micro-Beams under the Effect of van der Waals Force, A Semi-Analytical Approach,” Communications in Nonlinear Science and Numerical Simulation, Vol. 34, pp. 130-141, 2016.

98. Kazemnia, E., Hosseini, S.M., and Tahani, M., "An Analytical Solution for Thermoelastic Damping in a Micro-Beam Based on Generalized Theory of Thermoelasticity and Modified Couple Stress Theory," Applied Mathematical Modelling, Vol. 40, No. 4, pp. 3164-3174, 2016.

97. Anjomshoa, A. and Tahani, M., "Vibration Analysis of Orthotropic Circular and Elliptical Nano-Plates Embedded in Elastic Medium Based on Nonlocal Mindlin Plate Theory and Using Galerkin Method," Journal of Mechanical Science and Technology, Vol. 30, No. 6, pp. 2463-2474, 2016.

96. Tahani, M., Batra, R., and Askari, A.R., "Size-Dependent Free Vibrations of Electrostatically Pre-Deformed Functionally Graded Micro-Cantilevers," IOP Conf. Series: Materials Science and Engineering, Vol. 87, 012117, 2015.

95. Tahani, M., Abolbashari, M.H., Talebian, S.T., Mehrafrooz, B., and Saberi Nik, H. “Transient Heat Conduction in Multiwall Carbon Nanotubes,” Latin American Journal of Solids and Structures, Vol. 12, No. 4, pp. 711-729, 2015.

94. Dastjerdi, S., Jabbarzadeh, M., and Tahani, M. “Nonlinear Bending Analysis of Sector Graphene Sheet Embedded in Elastic Matrix Based on Nonlocal Continuum Mechanics,” International Journal of Engineering, Vol. 28, No. 5, pp. 802-811, 2015.

93. Tahani, M. and Yousefsani, S.A, “On Thermomechanical Stress Analysis of Adhesively Bonded Composite Joints in Presence of an Interfacial Void,” Composite Structures, Vol. 130, pp. 116-123, 2015.

92. Tahani, M., Askari, A.R., Mohandes, Y. and Hassani, B., “Size-Dependent Free Vibration Analysis of Electrostatically Pre-Deformed Rectangular Micro-Plates based on the Modified Couple Stress Theory,” International Journal of Mechanical Sciences, Vols. 94-95, pp. 185-198, 2015.

91. Askari, A.R. and Tahani, M., “Analytical Determination of Size-Dependent Natural Frequencies of Fully Clamped Rectangular Micro-Plates Based on the Modified Couple Stress Theory,” Journal of Mechanical Science and Technology, Vol. 29, No. 5, pp. 2135-2145, 2015.

90. Amiri Moghadam, A.A., Alizadeh, V., Tahani, M., Kouzani, A., and Kaynak, A., “Equivalent Dynamic Thermoviscoelastic Modeling of Ionic Polymers,” Polymers for Advanced Technologies, Vol. 26, No. 4, pp. 385-391, 2015.

89. Rezazadeh, M., Tahani, M., and Hosseini, S.M., “Thermoelastic Damping in a Nonlocal Nano-Beam Resonator as NEMS based on the Type III of Green-Naghdi Theory (with Energy Dissipation),” International Journal of Mechanical Sciences, Vol. 92, pp. 304-311, 2015.

88. Mohsenzadeh, A., Tahani, M., and Askari, A.R., “A Novel Method for Investigating the Casimir Effect on Pull-In Instability of Electrostatically Actuated Fully Clamped Rectangular Nano/Micro-Plates,” Journal of Nanoscience, Vol. 2015, Article ID 328742, pp. 1-9, 2015.

87. Rouhi, G., Tahani, M., Haghighi, B., and Herzog, W. “Prediction of Stress Shielding Around Orthopedic Screws: a Time-Dependent Bone Remodeling Analysis using a Finite Element Approach,” Journal of Medical and Biological Engineering, Vol. 35, No. 4, pp. 545-554, 2015.

86. Mousavi, S.M. and Tahani, M., “Bending of Moderately Thick Annular Sector Plates with Variable Thickness and General Boundary Conditions Using Extended Knatorovich Method,” Journal of Engineering Mechanics, Vol. 141, No. 8, 04015021, 2015.

85. Tahani, M., Abolbashari, M.H., Mohajeri Minaei, G., and Talebian, T., “Analytical Solution for Dynamic Behavior of Multiwall Carbon Nanotubes subjected to Mechanical Shock Loading,” Journal of Mechanical Science and Technology, Vol. 28, No. 9, pp. 3545-3554, 2014.

84. Maghami, S.A. and Tahani, M., “Thermal Bending Analysis of Doubly-Curved Composite Laminated Shell Panels with General Boundary Conditions and Laminations,” Journal of Thermal Stresses, Vol. 38, No. 2, pp. 250-270, 2015.

83. Askari, A.R. and Tahani, M., “Size-Dependent Dynamic Pull-in Analysis of Beam-Type MEMS under Mechanical Shock Based on the Modified Couple Stress Theory,” Applied Mathematical Modelling, Vol. 39, No. 2, pp. 934-946, 2015.

82. Askari, A.R. and Tahani, M., “Presenting a Size-Dependent Electro-Mechanical Model for Rectangular Plate-Based Resonant Micro-Sensors Based on Modified Couple Stress Theory,” Modares Mechanical Engineering, Vol. 14, No. 8, pp. 121-130, 2014. (in Persian).

81. Tahani, M. and Askari, A.R., “Accurate Electrostatic and van der Waals Pull-In Prediction for Fully Clamped Nano/Micro-Beams using Linear Universal Graphs of Pull-In Instability,” Physica E: Low-dimensional Systems and Nanostructures, Vol. 63, pp. 151-159, 2014.

80. Askari, A.R. and Tahani, M., “An Alternative Reduced Order Model for Electrically Actuated Micro-Beams under Mechanical Shock,” Mechanics Research Communications, Vol. 57, pp. 34-39, 2014.

79. Alizadeh, V.R. and Tahani, M., “Nonlinear Viscoelastic Dynamic Modeling of High Speed PPy-Based Trilayer Bending Plate-Like Actuators Based on FSDPT,” Journal of Intelligent Material Systems and Structures, Vol. 26, No. 3, pp. 292-308, 2015.

78. Selahi, E., Setoodeh, A.R., and Tahani, M., “Three-Dimensional Transient Analysis of Functionally Graded Truncated Conical Shells with Variable Thickness Subjected to an Asymmetric Dynamic Pressure,” International Journal of Pressure Vessels and Piping, Vol. 119, pp. 29-38, 2014.

77. Mehrkish, A., Tahani, M., and Zare, S., “Introducing a Novel Active Multi-Chamber Engine Mount with Self-Cooling Capability with an Estimation of Vibrational Parameters,” Indian Journal of Scientific Research, Vol. 1, pp. 744-751, 2014.

76. Mehrkish, A., Tahani, M., and Rafiee, M.M., “Study of Engine Mount Effect on Improving the Vehicle Performance,” Journal of Acoustics and Vibration, Vol.2, No. 3, 2013. (in Persian).

75. Naserian-Nik, A.M., Tahani, M., and Karttunen, M., “Molecular Dynamics Study of DNA Oligomers under Angled Pulling,” RSC Advances, Vol. 4, No. 21, pp. 10751-10760, 2014.

74. Naserian-Nik, A.M. and Tahani, M., “Molecular Dynamics Study of DNA under Tensile Forces,” Modares Mechanical Engineering, Vol. 14, No. 12, pp. 104-112, 2015. (in Persian).

73. Ghazanfar, H., Mehrkish, A., Norouzi Ghazbi, S., and Tahani, M., “Study on Effect of Electric/Combustion Engine on Performance of Parallel Hybrid Vehicle and Proposing Engine Selection Algorithm,” The Journal of Engine Research, Vol. 31, 21-31, 2013. (in Persian).

72. Mehrkish, A. and Tahani, M., “A Study on Side Effects of Coolling in a New Active Multi-Compartment Mount,” The Journal of Engine Research, Vol. 29, pp. 25-38, 2013. (in Persian)

71. Yousefsani, S.A. and Tahani, M., “An Analytical Investigation on Thermo-Mechanical Stress Analysis of Adhesively Bonded Joints Undergoing Heat Conduction,” Archive of Applied Mechanics, Vol. 84, No. 1, pp. 67-79, 2014.

70. Ghazanfar, H. and Tahani, M., “Microelectromechanical Systems,” Engineering Mechanics, Vol. 89, 2013. (in Persian).

69. Askari, A.R. and Tahani, M., "Dynamic Pull-In Investigation of a Clamped-Clamped Nanoelectromechanical Beam under Ramp-Input Voltage and the Casimir Force," Shock and Vibration, Vol. 2014, pp. 1-5, 2014.

68. Selahi, E., Tahani, M., and Yousefsani, S.A., "Analytical Solution of Stress Field in Adhesively Bonded Composite Single-Lap Joints under Mechanical Loadings," International Journal of Engineering, Vo. 27, No. 3, 2014.

67. Mehrkish, A., Tahani, M., Ghazanfar, H., Nourouzi Ghazbi, S., and Zare, S., "A Study on Systematic Procedure for Choosing the Best Powertrain Configuration in Hybrid Sedan Cars," Applied Mechanics and Materials, Vol. 390, pp. 360-364, 2013.

66. Andakhshideh, A. and Tahani, M., "Free-Edge Stress Analysis of General Rectangular Composite Laminates under Bending, Torsion and Thermal Loads," European Journal of Mechanics - A/Solids, Vol. 42, pp. 229-240, 2013.

65. Naserian-Nik, A.M., Tahani, M., and Karttunen, M., "Pulling of Double-Stranded DNA by Atomic Force Microscopy: A Simulation in Atomistic Details," RSC Advances, Vol. 3, No. 26, pp. 10516-10528, 2013.

64. Tahani, M., Setoodeh, A.R., and Selahi, E., "Three-Dimensional Transient Analysis of Functionally Graded Cylindrical Shells subjected to Asymmetric Dynamic Pressure," Science and Engineering of Composite Materials, Vol. 20, No. 1, pp. 75-85, 2013.

63. Maleki, S. and Tahani, M., “Non-Linear Analysis of Fiber-Reinforced Open Conical Shell Panels Considering Variation of Thickness and Fiber Orientation under Thermo-Mechanical Loadings,” Composites Part B, Vol. 52, pp. 245-261, 2013.

62. Maleki, S. and Tahani, M., “An Investigation into the Static Response of Fiber-Reinforced Open Conical Shell Panels Considering Various Types of Orthotropy,” Proc. IME. C. J. Mech. Eng. Sci., Vol. 228, No. 1, pp. 3-21, 2014.

61. Yousefsani, S.A. and Tahani, M., “Analytical Solutions for Adhesively Bonded Composite Single-Lap Joints under Mechanical Loadings using Full Layerwise Theory,” International Journal of Adhesion and Adhesives, Vol. 43, pp. 32-41, 2013.

60. Tahani, M. and Mousavi, S.M. “Analytical Solution for Bending Problem of Moderately Thick Composite Annular Sector Plates with General Boundary Conditions and Loadings Using Multi-Term Extended Kantorovich Method,” Archive of Applied Mechanics, Vol. 83, No. 6, pp. 969-985, 2013.

59. Maleki, S. and Tahani, M., “Bending Analysis of Laminated Sector Plates with Polar and Rectilinear Orthotropy,” European Journal of Mechanics - A/Solids, Vol. 40, pp. 84-96, 2013.

58. Askari, A.R. and Tahani, M., “Analytical Approximations to Nonlinear Vibration of a Clamped Nanobeam in Presence of the Casimir Force,” International Journal of Aerospace and Lightweight Structures, Vol. 2, No. 3, pp. 317-334, 2012.

57. Yousefsani, S.A. and Tahani, M., “Accurate Determination of Stress Distributions in Adhesively Bonded Homogeneous and Heterogeneous Double-Lap Joints,” European Journal of Mechanics - A/Solids, Vol. 39, pp. 197-208, 2013.

56. Andakhshideh, A. and Tahani, M., “Interlaminar Stresses in General Thick Rectangular Laminated Plates under In-Plane Loads,” Composites Part B, Vol. 47, pp. 58-69, 2013.

55. Askari, A.R. and Tahani, M., “Investigating Nonlinear Vibration of a Fully Clamped Nanobeam in Presence of the van der Waals Attraction,” Applied Mechanics and Materials, Vols. 226-228, pp. 181-185, 2012.

54. Talebian, S.T., Tahani, M., Abolbashari, M.H., and Hosseini, S.M., “Response of Multiwall Carbon Nanotubes to Impact Loading,” Applied Mathematical Modelling, Vol. 37, No. 7, pp. 5359-5370, 2013.

53. Yazdanpanah Moghadam, P., Tahani, M., Naserian-Nik, A.M., “Analytical Solution of Piezolaminated Rectangular Plates with Arbitrary Clamped/Simply-Supported Boundary Conditions under Thermo-Electro-Mechanical Loadings,” Applied Mathematical Modelling, Vol. 37, No. 5, pp. 3228-3241, 2013.

52. Talebian, S.T., Tahani, M., Abolbashari, M.H., and Hosseini, S.M., “An Analytical Solution for Thermal Shock Analysis of Multiwall Carbon Nanotubes,” Computational Materials Science, Vol. 61, pp. 291-297, 2012.

51. Talebian, S.T., Tahani, M., Abolbashari, M.H., and Hosseini, S.M., “A Glance on the Effects of Temperature on Axisymmetric Dynamic Behavior of Multiwall Carbon Nanotubes,” Acta Mechanica Sinica, Vol. 28, No. 3, pp. 720-738, 2012.

50. Maleki, S. and Tahani, M., “Non-Linear Analysis of Moderately Thick Laminated Plates and Shell Panels under Thermo-Mechanical Loadings,” ZAMM, Vol. 92, No. 8, pp. 652-667, 2012.

49. Setoodeh, A., Tahani, M., and Selahi, E., “Transient Dynamic and Free Vibration Analysis of Functionally Graded Truncated Conical Shells with Non-Uniform Thickness Subjected to Mechanical Shock Loading,” Composites Part B, Vol. 43, No. 5, pp. 2161-2171, 2012.

48. Haghighi, B., Tahani, M., and Rouhi, G., “Analysis of Bone Remodeling around Functionally Graded Orthopedic Screws and Comparison with Metal Screws Using Finite Element Method,” Iranian Journal of Biomedical Engineering, Amirkabir University, to appear. (in Persian).

47. Tahani, M. and Andakhshideh, A., “Interlaminar Stresses in Thick Rectangular Laminated Plates with Arbitrary Laminations and Boundary Conditions under Transverse Loads,” Composite Structures, Vol. 94, No. 5, pp. 1793-1804, 2012.

46. Mousavi, S.M. and Tahani, M., “Analytical Solution for Bending of Moderately Thick Radially Functionally Graded Sector Plates with General Boundary Conditions using Multi-Term Extended Kantorovich Method,” Composites Part B, Vol. 43, No. 3, pp. 1405-1416, 2012.

45. Amiri Moghadam, A.A., Moavenian, M., Torabi, K., and Tahani, M., “Analytical Dynamic Modeling of Fast Trilayer Polypyrrole Bending Actuators,” Smart Materials and Structures, Vol. 20, 115020 (9pp), 2011.

44. Maleki, S., Tahani, M., and Andakhshideh, A., “Transient Response of Laminated Plates with Arbitrary Laminations and Boundary Conditions under General Dynamic Loadings,” Archive of Applied Mechanics, Vol. 82, No. 5, pp. 615-630, 2012.

43. Maleki, S., Tahani, M., and Andakhshideh, A., “Static and Transient Analysis of Laminated Cylindrical Shell Panels with Various Boundary Conditions and General Lay-ups,” ZAMM, Vol. 92, No. 2, pp. 124-140, 2012.

42. Setoodeh, A., Tahani, M., and Selahi, E., “Hybrid Layerwise-Differential Quadrature Transient Dynamic Analysis of Functionally Graded Axisymmetric Cylindrical Shells Subjected to Dynamic Pressure,” Composite Structures, Vol. 93, pp. 2663-2670, 2011.

41. Safari, A., Hosseini, S.M., and Tahani, M., “Thermal Shock Analysis and Thermo-Elastic Stress Waves in Functionally Graded Thick Hollow Cylinders using Analytical Method,” International Journal of Mechanics and Materials in Design, Vol. 7, No. 3, pp. 167-184, 2011.

40. Talebian, S.T. and Tahani, M., “A Study on Dynamic Behavior of Functionally Graded Thick Hollow Circular Cylinders,” Proc. IME. C. J. Mech. Eng. Sci., Vol. 226, No. 2, pp. 498-513, 2012.

39. Tahani, M. Naserian-Nik, A.M., “Bending Analysis of Piezolaminated Rectangular Plates under Electromechanical Loadings using Multi-Term Extended Kantorovich Method,” Mechanics of Advanced Materials and Structures, Vol. 20, No. 6, pp. 415-433, 2013.

38. Safari, A., Tahani, M., and Hosseini, S.M., “Two-Dimensional Dynamic Analysis of Thermal Stresses in a Finite-Length FG Thick Hollow Cylinder subjected to Thermal Shock Loading using an Analytical Method,” Acta Mechanica, Vol. 220, No. 1-4, pp. 299-314, 2011.

37. Talebian, S.T., Tahani, M., Abolbashari, M.H., and Hosseini, S.M., “Effects of Dimensional Parameters and Various Boundary Conditions on Axisymmetric Vibrations of Multiwalled Carbon Nanotubes Using a Continuum Model, Archive of Applied Mechanics, Vol. 81, No. 8, pp. 1129-1140, 2011.

36. Tahani, M. and Karimi, G., “A New Controlling Parameter in Design of Above Knee Prosthesis,” World Academy of Science, Engineering and Technology, Vol. 69, pp. 428-435, 2010.

35. Talebian, T., Tahani, M., Abolbashari, M.H., and Hosseini, S.M., “Axisymmetric Vibration Analysis of Finite Length Multiwalled Carbon Nanotubes Using a Continuum Model,” World Academy of Science, Engineering and Technology, Vol. 69, pp. 421-427, 2010.

34. Tahani, M. and Mousavi, S.M., “Analytical solution for bending analysis of thick orthotropic sector plates,” World Academy of Science, Engineering and Technology, Vol. 69, pp. 412-420, 2010.

33. Talebian, S.T., Tahani, M., Hosseini, S.M., and Abolbashari, M.H., “Displacement Time History Analysis and Radial Wave Propagation Velocity in Pressurized Multiwall Carbon Nanotubes,” Computational Materials Science, Vol. 49, pp. 283-292, 2010.

32. Tahani, M., Talebian, T., and Todoroki, A., “Transient Analysis of Functionally Graded Thick Hollow Circular Cylinders under Mechanical Loadings,” Journal of Solid Mechanics and Materials Engineering, Vol. 4, No. 8, 2010.

31. Tahani, M., Hoseini, S.M., Safari, A., and Todoroki, A., “Transient and Dynamic Stress Analysis of Functionally Graded Thick Hollow Cylinder Subjected to Thermal Shock Loading Using an Analytical Method,” Journal of Solid Mechanics and Materials Engineering, Vol. 4, No. 8, 2010.

30. Naserian Nik, A.M. and Tahani, M., “Free Vibration Analysis of Moderately Thick Rectangular Laminated Composite Plates with Arbitrary Boundary Conditions,” Structural Engineering and Mechanics, Vol. 35, No. 2, pp. 217-240, 2010.

29. Zabihi Ferezqi, H., Tahani, M., Ekhteraei Toussi, H., “Analytical Approach to Free Vibrations of Cracked Timoshenko Beams Made of Functionally Graded Materials,” Mechanics of Advanced Materials and Structures, Vol. 17, pp. 353-365, 2010.

28. Naserian-Nik, A.M. and Tahani, M., “Static Analysis of Piezoelectric Laminated Composite Plates,” Journal of Faculty of Engineering, University of Tehran, Vol. 43, No. 4, 2009. (in Persian).

27. Izadi, M. and Tahani, M., “Analysis of Interlaminar Stresses in General Cross-Ply Laminates with Distributed Piezoelectric Actuators,” Composite Structures, Vol. 92, No. 3, pp. 757-768, 2010.

26. Naserian-Nik, A.M. and Tahani, M., “Bending Analysis of Laminated Composite Plates with Arbitrary Boundary Conditions,” Journal of Solid Mechanics, Vol. 1, pp. 1-13, 2009.

25. Naserian-Nik, A.M. and Tahani, M., “Levy-Type Bending Analysis of Cross-Ply Piezoelectric Composite Laminates,” Journal of Applied and Computational Sciences in Mechanics, Vol. 22, No. 2, 2011 (in Persian).

24. Naserian-Nik, A.M. and Tahani, M., “Analytical Solutions for Bending Analysis of Rectangular Laminated Plates with Arbitrary Lamination and Boundary Conditions,” Journal of Mechanical Science and Technology, Vol. 23, pp. 2253-2267, 2009.

23. Mirzababaee, M. and Tahani, M., “Accurate Determination of Coupling Effects on Free Edge Interlaminar Stresses in Piezoelectric Laminated Plates,” Materials & Design, Vol. 30, No. 8, pp. 2963-2974, 2009.

22. Tahani, M. and Mirzababaee, M., “Analytical Solution of Electromechanical Coupling Effect on Interlaminar Stresses at Free-Edges of Angle-Ply Piezoelectric Laminates under Mechanical Loading,” Journal of Applied and Computational Sciences in Mechanics, Vol. 21, No. 2, pp. 89-108, 2011. (in Persian).

21. Tahani, M. and Mirzababaee, M., “Higher-Order Coupled and Uncoupled Analyses of Free Edge Effect in Piezoelectric Laminates under Mechanical Loadings,” Materials & Design, Vol. 30, pp. 2473-2482, 2009.

20. Tahani, M. and Talebian, T., “Analysis of Functionally Graded Cylindrical Vessels under Mechanical and Thermal Loads,” Amirkabir Journal of Mechanical Engineering, Vol. 41, No. 1, 2009. (in Persian).

19. Mahdavi, M.H., Farshidianfar, A., Tahani, M., Mahdavi, S., and Dalir, H., “A More Comprehensive Modeling of Atomic Force Microscope Cantilever,” Journal of Ultramicroscopy, Vol. 109, pp. 54-60, 2008.

18. Tahani, M. and Mirzababaee, M., “Nonlinear Bending Analysis of Functionally Graded Plates under Thermomechanical Loadings Based on a Layerwise Theory,” European Journal of Mechanics A/Solids, Vol. 28, pp. 248-256, 2009.

17. Abachizadeh, M. and Tahani, M., “An Ant Colony Optimization Approach to Multi-Objective Optimal Design of Symmetric Hybrid Laminates for Maximum Fundamental Frequency and Minimum Cost,” Structural and Multidisciplinary Optimization, Vol. 37, pp. 367-376, 2009.

16. Vahdati, A., Rouhi, G., Ghalichi, F., and Tahani, M., “Mechanically Induced Trabecular Bone Remodeling Including Cellular Accommodation Effect: A Computer Simulation,” Transactions of the Canadian Society for Mechanical Engineering, Vol. 32, No. 3-4, pp. 371-381, 2008.

15. Tahani, M., “Analysis of Laminated Composite Beams Using Layerwise Displacement Theories,” Composite Structures, Vol. 79, No. 4, pp. 535-547, 2007.

14. Jabbarzadeh, M., Naghdabadi, N., and Tahani, M., “Corotational Lagrangian Formulation for Elastic and Elastic-Plastic Large Deformation Analysis Using FEM,” Journal of Faculty of Engineering, Ferdowsi University of Mashhad, Vol. 18, No. 1, pp. 21-36, 2006. (in Persian).

13. Tahani, M., Torabizadeh, M.A., and Fereidoon, A., “Nonlinear Analysis of Functionally Graded Beams,” Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, No. 1-2, pp. 315-318, 2006.

12. Mirzababaee, M., Tahani, M., and Zebarjad, S.M., “A New Approach for the Analysis of Functionally Graded Beams,” Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, No. 1-2, pp. 265-268, 2006.

11. Zebarjad, S.M., Sajjadi, S.A., Tahani, M., and Lazzeri A., “A Study on Thermal Behaviour of HDPE/CaCO3 Nanocomposites,” Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, No. 1-2, pp. 173-176, 2006.

10. Zebarjad, S.M., Sajjadi, S.A., and Tahani, M., “Modification of Fracture Toughness of Isotactic Polypropylene with a Combination of EPR and CaCO3 Particles,” Journal of Materials Processing Technology, Vol. 175, pp. 446-451, 2006.

9. Tahani, M., “Three-Dimensional Stress Analysis of Rotating Composite Beams Due to Material Discontinuities,” Materials & Design, Vol. 27, pp. 976–982, 2006.

8. Tahani, M., Nosier, A. and Zebarjad, S. M., “Deformation and Stress Analysis of Circumferentially Fiber-Reinforced Composite Disks,” International Journal of Solids and Structures, Vol. 42, pp. 2741-2754, 2005.

7. Zebarjad, S. M., Tahani, M., and Sajjadi, S. A., “Influence of Filler Particles on Deformation and Fracture Mechanism of Isotactic Polypropylene,” Journal of Materials Processing Technology, Vol. 155-156C, pp. 1459-1464, 2004.

6. Tahani, M. and Nosier, A., “Accurate Determination of Interlaminar Stresses in General Cross-Ply Laminates,” Mechanics of Advanced Materials and Structures, Vol. 11, No. 1, pp. 67-92, 2004.

5. Tahani, M. and Nosier, A., “Free Edge Stress Analysis of General Cross-Ply Composite Laminates under Extension and Thermal Loading,” Composite Structures, Vol. 60, No. 1, pp. 91-103, 2003.

4. Tahani, M. and Nosier, A., “Edge Effects of Uniformly Loaded Cross-Ply Composite Laminates,” Materials & Design, Vol. 24, No. 8, pp. 647-658, 2003.

3. Tahani, M. and Nosier, A., “Three-Dimensional Interlaminar Stress Analysis at Free Edges of General Cross-Ply Composite Laminates,” Materials & Design, Vol. 24, No. 2, pp. 121-130, 2003.

2. Tahani, M. and Nosier, A., “Stress Field Near the Edges of Balanced Symmetric Composite Laminates,” Sharif Journal of Science & Technology, No. 26, pp. 10-18, 2005. (in Persian).

1. Nosier, A., Tahani, M., and Hamed, M. A., “Interlaminar Stress Analysis in a Rotating Composite Beam,” Sharif Journal of Science & Technology, No. 20, pp. 24-31, 2002. (in Persian).